Related Manuals for Kirk 4080
Summary of Contents for Kirk 4080
- Page 1 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 1 (Sort/Process Black plade) KIRK 4080 Handset User’s Guide...
-
Page 2: Table Of Contents
Side 2 (Sort/Process Black plade) Congratulations on your new KIRK handset Your new handset from KIRK telecom will provide you with the greatest possible degree of flexibility and mobility due to high battery capacity, low weight, practical size and design. Contents: 9.5 Menu subscription and login ..........22... -
Page 3: Warning
10:52 Side 3 (Sort/Process Black plade) 1. Warnings The KIRK 4080 is developed for use in the following potentially explosive working environments, as defined by local fire protection authorities. Class I, Zone 1 AEx ib IIC T3 The handset complies with the Standard UL 60079-0 and UL 60079-11 as well as CAN/CSA-E60079-0:02 Mars 2002 and CAN/CSA-E60079-11-02 Mars 2002 Class I, Division 2, Group A, B, C &... -
Page 4: Label Information
2. Label information SW : 6E HW : 4B Software and Hardware version 0239 80XX 07W11 Product number and Production date (year 2007, week 11) 00077 0612630 4 Serial number... -
Page 5: Construction
3. Construction Headset Connector Display with backlight MENU key Left arrow key, Redial menu from standby text Key for internal calls (not used on KIRK system 1500) Loud speaking Alarm key Keyboard LOCK (Menu*) Right arrow key, save number. Recall key... -
Page 6: Charging
(Sort/Process Black plade) 5. Charging Do not charge KIRK 4080 in a potentially explosive atmosphere. Use only the dedicated charger 8464 2458 (orange) for charging KIRK 4080. It takes approximately 3 1/2 hours to charge the handset from fully discharged to its full capacity. Place the handset in the charger. -
Page 7: Turning The Handset On/Off
- On hook/off hook and turn ON ” ” - * (Change from pulse to DTMF on KIRK CCFP), Long = pause (-), extra long: change from pulse to DTMF (a ”T” appears in the display, GAP standard) “0-9” - Digits or letters in alphanumeric mode (names and messages) “... -
Page 8: Making A Call
CLIP or the name of the person who called and the LED is on Press the -key, the -icon will flash until the connection is established Using the handset in residential systems: (not in KIRK systems 1500 and 500) Internal call post-dial: Press the INT-key, the -icon in the display will flash... -
Page 9: Receiving Calls
KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 8 (Sort/Process Black plade) 8.1. Receiving calls If the phone rings, the call can be answered by pressing the -key. When ringing the LED flashes fast, and the display shows the CLIP (if presented). If it is an external call (or if no CLIP) the display shows “INCOMING CALL”. -
Page 10: Menu Structure
KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 9 (Sort/Process Black plade) 9. Menu structure Pressing the MENU-key, enters or exits the menu structure. It has to be used if a “NO” or “CLEAR” is wanted in the menu structure. Pressing the -key, jumps to a lower level in the menu. -
Page 11: The Key Functions
KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 10 (Sort/Process Black plade) 9.2 The key functions Capital letter Small letter ? ! 1 - + * / = & ( ) % ¿ ¡ ? ! 1 - + * / = & ( ) % ¿ ¡... -
Page 12: Handset Functions
: Can be turned on/off using the < and >. Confirm with ( ). When turned on, the telephone automatically ANSWER goes off hook when ringing. If subscribed to a KIRK system it automatically goes on hook when calls are terminated : Automatic on-hook is only reliable under defined conditions related to the interface settings between the... -
Page 13: Menu Subscription And Login
KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 12 (Sort/Process Black plade) 9.5 Menu subscription and login SUBSCRIPTION REMOVE MENU REMOVE? LOGIN Password is factory set 0000 P A S S W O R D _ _ _ _ _ M E N U... -
Page 14: Login
KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 13 (Sort/Process Black plade) 9.5.2 Login The handset can be subscribed to 10 different systems enabling you to use the same handset on 10 different systems. If you would like to change to another system, use the login menu to connect to another system number. -
Page 15: Remove Subscription
If one of the systems not chosen is removed, the handset remains connected to the system in use. 9.5.5 Change startup text The startup text is predefined as e.g. ”KIRK telecom” as factory default. This can be changed by using the following **** procedure: Press , BOOK, ( ) and give in the new startup text by the keyboard followed by ( ). -
Page 16: Redial
KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 15 (Sort/Process Black plade) 9.7 Redial The handset has maximum 10 redial numbers and 10 Caller ID’s placed in the same stack. Each number is only represented once. Enter the redial menu by pressing ”< ”(Redial) from the standby text. Repeated presses at the “<”... -
Page 17: Book
KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 16 (Sort/Process Black plade) 9.8 Book Storing a number (max. 24 digits) in the telephone book is done by pressing the number to be stored (in on hook), then press the “>”- key followed by the “ ” key. The book can store up to 65 numbers with name. Typing of the name and a confirmation is required. -
Page 18: External Services
9.9 External services External services are facilities placed in the main system, and only available if the handset is subscribed to a KIRK system. Under External services can be found; Clip stack, Delete clip stack and local Phone book. The Local Pho- ne book is a common Phone book for all handsets subscribed to the actual system, and all handsets subscribed to the system are listed in the Phone book. -
Page 19: Mail/Textmessages
KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 18 (Sort/Process Black plade) 9.11 Mail/Text Messages Available in systems configured with the possibility of sending text messages At the reception of a text message the envelope icon appears in the display. The envelope icon is indicating one or more unread messages. - Page 20 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 19 (Sort/Process Black plade) Delete a mail Open the mail by pressing the R-key followed by the -key, press the -key again and use the < >-keys to find the delete feature, press the...
-
Page 21: Menu Language
KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 20 (Sort/Process Black plade) 9.12 Menu language There are 6 predefined languages in the handset: English, German, French, Italian, Spanish and Dutch. If a 7th language is present this will be shown as ”OPEN”. The ”OPEN” selection is a specific dealer language and is facto-ry programmed. -
Page 22: Information
11.2 Error information Improper function of the handset might be related to the installation of the KIRK system or failures related to the main system. Before declaring a handset for repair, be sure that the main system is operating properly. -
Page 23: Technical Information
KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 22 (Sort/Process Black plade) 11.4. Technical information Approvals Acoustics: TBR 10 Radio: FCC PART 15, SUBPART D Access profile: TBR 22 (GAP) Safety: UL 60950-1 Size and weight Size: 149 x 50 x 28 mm Weight: 123 g including battery ±... - Page 24 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 23 (Sort/Process Black plade) 11.5 Important safety instructions and product information Before using your telephone equipment, you should always follow basic safety instruction to reduce the risk of fire, electrical shock and injury to persons, and damage to property.
- Page 25 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 24 To reduce the risk of electrical shock or burns, do not disassemble this product. Opening or removing covers may expose you to dangerous voltages, dangerous electrical current, or other risks. Incorrect reassemble can cause electrical shock when the appliance is subsequently used.
- Page 26 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 25 13 Do not place the unit near microwave ovens, radio equipment, or non-ground connected televisions. These appliances may cause electrical interference to the base or handset 14 The unit must be installed on a hard, plane surface and connected to a functional 120 volt AC power netadapter and plug the adapter into the power outlet 15 The system will not operate in the event of a blackout.
- Page 27 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 26 Power failure In the event of a power failure, you cannot use the wireless solution to make or receive calls NOTICES NOTICE Installing: Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company.
- Page 28 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 27 CAUTIONS Connections: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspe- ction authority, or electrician, as appropriate. If your telephone equipment causes harm to the telephone network, the telephone operator may ask you to disconnect the system from the line until the problem has been corrected or they may discontinue your service temporarily.
- Page 29 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 28 FCC Note: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interfe- rence that may cause undesired operation.
- Page 30 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 29 IC Note: Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
- Page 31 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 30 CAUTION Privacy: Privacy of communication may not be ensured when using this phone. Power Outage: In the event of a power outage, your cordless telephone will not operate. The cordless telephone requires elect- ricity for operation.
- Page 32 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 31 LIMITED WARRANTY This limited, non-transferable warranty is provided to the original purchaser. The product is warranted to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase as shown on the purchaser’s receipt.
- Page 33 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 32 This warranty does not apply to the defects outside of our control, including but not limited to acts of God, fire, flood and dama- ge while in transit to service facility. We do not warranty that the product will be compatible with any telephone equipment, systems or party lines.
- Page 34 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 33 THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED. ANY IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICU- LAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY. WE DISCLAIM ANY LIA-...
- Page 35 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 34 Declaration of Conformity Manufacturer KIRK telecom A/S Langmarksvej 34 8700 Horsens Denmark Product Type KIRK 4080 EX handset 0234 80XX Type number XX can vary (numbers and letters) depending on software and design.
- Page 36 General Terminal Attachment requirements July 1999 Application, Intended purpose The KIRK 4080 is a UPCS DECT based handset, designed to be used in connection with KIRK wireless communication solutions. Meaning of Conformity For the application of the equipment in areas which have a potentially explosive atmosphere, the manufacturer declares on his own responsibility that under the claimed type of protection the equipment is in conformance with the relevant standards.
- Page 37 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 36 (Sort/Process Black plade) Electrical apparatus for potentially explosive atmospheres Standard Date UL 60079-0 General requirements August 15, 2005 UL 60079-11 Intrinsic Safety “ i “ December 2, 2002 CAN/CSA-E60079-0:02 General requirements March 2002 CAN/CSA-E60079-11:02 Intrinsic Safety “...
- Page 38 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 37 (Sort/Process Black plade) Quality Assurance The product is designed and produced by a manufacturing organisation, which is certified on ISO 9001: 2000. These products are in conformance with the full quality assurance procedures as mentioned in annex III, IV and VII of the ATEX directive 94/9/EC and annex V of the R&TTE directive 99/5/EC and bears the marking XXXX.
- Page 39 • Please consult your system manager for instruction before using KIRK 4080 • Do not charge KIRK 4080 in a potentially explosive atmosphere • Use only the dedicated charger 8464 2458 (orange) for charging KIRK 4080 • Do not change the battery in a potentially explosive atmosphere •...
- Page 40 Class I Classification for Flammable Gases Zone 1 Area Classification for Flammable Gases KIRK 4080 is approved according to International standards ib Intrinsic safe, ib category Equipment group II, ib group C (gas group C) Temperature group T3 Class I Classification for Flammable Gases Div.2...
- Page 41 KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 40 (Sort/Process Black plade) If in doubt about installation, configuration or the correct functioning of the product please consult the manufacturer: KIRK telecom A/S Customer Support Langmarksvej 34 8700 Horsens Denmark Tel: +45 75602850...
Need help?
Do you have a question about the 4080 and is the answer not in the manual?
Questions and answers