Optical Drive - HP Z8 G4 Maintenance And Service Manual

Optical drive

1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Remove the interior upper cover (see
4. Disconnect the optical drive cables from the optical drive rear panel (1).
5. Release the optical drive by lifting up on the drive release bar (2).
6. Press on the optical drive rear panel (3).
7. Remove the optical drive (4).
Reverse this procedure to install the optical drive.
26 Chapter 4 Removal and replacement procedures
Preparation for disassembly on page
Access panel on page 22).
Interior covers on page
17).
24).