Rear Fan - HP Z8 G4 Maintenance And Service Manual

Rear fan

Follow these steps to remove the rear fan:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Remove the interior upper cover (see
4. Release the two upper retention clips (1) that secure the rear fan to the computer chassis.
5. Slide the rear fan (2) away from the computer.
6. Lift the rear fan (3) as far as the rear fan cable allows.
7. Disconnect the rear fan cable (4) from the system board.
8. Remove the rear fan.
Reverse this procedure to install the rear fan.
Preparation for disassembly on page
Access panel on page 22).
Interior covers on page
17).
24).
Rear fan 25