Storage Device - HP Z8 G4 Maintenance And Service Manual

Storage device

1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Release the drive cage door (1) by swinging it open.
4. Remove the drive cage (2) from the computer.
5. Separate the drive cage retention arms (1) from the storage device, making sure the retention pins (2) fully
release from the device.
6. Remove the storage device (3) from the drive cage.
Reverse this procedure to install the storage device.
Preparation for disassembly on page
Access panel on page 22).
17).
Storage device 23