Memory fan
Follow these steps to remove the memory fan:
1.
Prepare the computer for disassembly (see
following components:
a.
Access panel (see
b.
Interior upper cover (see
c.
Internal PCIe bracket (see
2.
Release the two retention clips (1) that secure the memory fan to the computer.
3.
Tilt the memory fan (2) away from the computer.
4.
Lift the memory fan (3) as far as the memory fan cable allows.
5.
Disconnect the memory fan cable (4) from the system board.
6.
Remove the memory fan.
Reverse this procedure to install the memory fan.
28
Chapter 4 Removal and replacement procedures
Preparation for disassembly on page
Access panel on page
22)
Interior covers on page
Internal PCIe bracket on page
24)
27)
17), and then remove the