Table of Contents
Advertisement
1. Getting Started
• The procedure may differ depending on the Web browser used.
Logging Out Using Web Image Monitor
This section explains the procedure for logging out the printer via Web Image Monitor.
1.
Click [Logout] to log out.
• Delete the cache memory of a Web browser after logging out.
User Lockout Function
This printer has the User Lockout function.
If an incorrect password is entered the number of times specified by the administrator, the User Lockout
function prevents further login attempts under the same user name.
If the User Lockout function is applied, authentication will fail even if the correct password is entered and
it will not be possible to use the printer.
For details about canceling the Lockout setting, see Security Guide.
Changing the Login Password
You can use alphanumeric characters and symbols when registering a login user password.
You can register up to 128 single-byte characters.
The password is case-sensitive. Keep this in mind when registering the password.
• Do not disclose the password to anyone else. Similarly, do not write the password down and leave
it where others can see it.
• Change the password periodically.
• Make the password difficult to guess.
Password Policy
This printer has a password policy.
Only passwords meeting the specified criteria for level of complexity and minimum number of
characters can be registered. For details about the criteria, see Security Guide.
Passwords can contain the following characters:
• Upper case letters: A to Z (26 characters)
• Lower case letters: a to z (26 characters)
40
midas-p3_com_operating_instructions_gb_00198452_eng.xml
Draft 2016/01/18
Advertisement
Table of Contents
