Operation
4. Operation
Control Panel Operation
Button
Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric value when in a function
<DOWN> Navigates downward through the menu list or decreases the numeric value when in a function
Knob 1 Push then turn to increase or decrease the dimmer
Knob 2 Push then turn to increase or decrease the zoom
Control Options
Set the Ovation F-265WW starting address in the 001–512 DMX range. This enables control of up to 102
products in the 5-channel 5Ch: 16bit-Full personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
•
To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will take you to the first programming level for that option.
•
To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. In this case, if there is another
programming level, you will see that first option, or you will see the selected value.
•
Press <MENU> repeatedly to exit to the previous main level.
Menu Map
Main Level
DMX Address
DMX
Personality
Dimmer
Static
Zoom
Strobe
Master/Slave
Dimmer
Mode
LED
Frequency
Fan Mode
Ovation F-265WW User Manual Rev. 1
Programming Levels
001–512
1Ch: 8bit Dim
2Ch: 16bit Dim
2Ch: 8bit Dim+Zoom
5Ch: 16bit-Full
0–255
0–255
0–255
Master
Slave
Off
Dimmer 1–3
600Hz
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
Auto
On
Off
Description
Selects DMX address (highest channel
restricted to personality chosen)
1-channel: 8-bit dimmer
2-channel: 16-bit dimmer
2-channel: 8-bit dimmer, zoom
5-channel: 16-bit dimmer, zoom, strobe,
motor reset
Controls intensity
Controls zoom
Controls strobe rate
DMX mode (Master)
Slave mode
Linear dimmer
Dimming curves Dimmer 1 (fast) to
Dimmer 3 (slow)
Sets the PWM frequency
Sets the fan to auto mode
Sets the fan to always on
Turns the fan off
Page 7 of 15