Thermocouple Commands - Keithley 2000 User Manual

Thermocouple commands

:TYPE <name>
[:SENSe[1]]:TEMPerature:TCouple:TYPE <name>
Parameters
Query
Description
:RSELect <name>
[:SENSe[1]]:TEMPerature:TCouple:RJUNction[1]:RSELect <name> Specify reference junction type.
Parameters
Query
Description
<name> = J
K
T
:TYPE? Query thermocouple type
This command is used to configure the Model 2000 for the thermocouple
type that you are using to make temperature measurements.
These commands are used to configure the reference junction for thermo-
couple temperature measurements.
<name> = SIMulated
REAL
:RSELect? Query reference junction type
This command is used to specify the type of reference junction that is go-
ing to be used for thermocouple temperature measurements. Specify
REAL if you are using an actual reference junction. The :REAL command
is then used to specify the desired reference temperature. Specify SIMu-
lated if you wish to use a simulated reference temperature. The :SIMulat-
ed command is then used to specify the desired simulated reference
temperature.
Specify TC type
Set operation for Type J thermocouples
Set operation for Type K thermocouples
Set operation for Type T thermocouples
Use simulated temperature as reference
Use a measured temperature as reference