Toyotomi FF-V30 Operating Manual page 5

12. CHILD LOCK indicator
11. POWER SAVER indicator
10. TIMER indicator
9. AUTO indicator
15. SUN MON TUE WED
THU FRI SAT indicator
4. TEMP/TIMER/
CLOCK/DAY set
3. TIMER button
5. POWER SAVER/
DAY SELECT button
7. ˚F/˚C toggle switch
1. ON/OFF switch:
2. AUTO button:
3. TIMER button:
4. TEMP/TIMER/CLOCK/DAY set:
5. POWER SAVER/DAY SELECT button:
6. CHILD LOCK/CLEAR button:
7. ˚F/˚C switch:
8. ON lamp:
9. AUTO indicator:
10. TIMER indicator:
11. POWER SAVER indicator:
12. CHILD LOCK indicator:
13. BURNING MODE indicator:
14. ˚F/˚C indicator:
15. SUN MON TUE WED THU FRI SAT indicator:
16. ON/OFF TIMER indicator:
17. Circulation fan:
18. Room temperature sensor:
19. Power supply cord:
Main switch turns heater on and off. When switched on, heater
begins operation and combustion starts after preheat period.
The button turns weekly timer operation modes on and off
which have been programmed into weekly timer.
The button turns weekly timer set mode on and off.
TEMP/TIMER/CLOCK/DAY set modes can be set by pressing
the s/MIN. or t/HOUR buttons.
The button turns POWER SAVER operation mode on and off.
When setting weekly timer, the button is used to select a day of
the week.
The button turns CHILD LOCK operation mode on and off.
When setting weekly timer, the CLEAR button is used.
˚F/˚C toggle switch.
Lit – Heater is in operation.
Flashing – Pre-heating and pre-purging.
Lit – Weekly timer operation is in use.
Lit – Heater operating in weekly timer set mode.
Lit – Heater operation in POWER SAVER mode.
Lit – Heater operation in CHILD LOCK mode.
Lit – Heater operation at high, medium or low combustion.
Lit – Digital indicator shows current temp.
Flashing – Current temp can be changed.
Lit – Digital indicator shows current day or timer day.
Lit – Digital indicator shows ON/OFF timer.
Three speed motor supplies high-capacity warm air flow
during high combustion for heating room up quickly, and
low or medium-capacity warm air flow during low or medium
combustion for maintaining comfortable room temperature.
Constantly senses room temperature and supplies information
to heater so that desired room temperature can be maintained.
For use in proper electrical outlet. (refer to SECTION A)
ENGLISH
13. BURNING MODE indicator
16. ON/OFF TIMER indicator
14. ˚F/˚C indicator
8. ON lamp
1. ON/OFF switch
2. AUTO button
6. CHILD LOCK/
CLEAR button
,
4