Mazda C960 V7 620 User Instructions page 16

● Other Engine Stop Conditions
The engine will stop if one of the following conditions is true.
1) The hood is opened.
2) The shift lever is put in a position other than the "P" position.
3) A door is opened.
4) The push start switch is pressed.
5) The pre-set warm up time has elapsed.
6) The brake pedal is engaged.
7) The accelerator pedal is engaged (the engine stops by the rpm restriction).
8) There is an advanced key or smart key inside the vehicle.
To run the vehicle...
If the vehicle engine is started with the remote contro
with the remote control or opening the vehicle's door.
Restart the engine with the push start switch.
Note
If the engine is started with the push start switch, it cannot be stopped with the
remote control.
stop the engine
l,
16