Table of Contents
Advertisement
4-16
a. Repeater Group Control/Status
Group Number (Unit ID) refers to the hub ID, a hub ID number can
be entered via the keyboard or use Prev. Group, Next Group
commands.
♦ Prev Group/Next Group: Cycle through Hub ID numbers press
Enter when the desired hub ID is reached.
Group Admin. State can be set to Enable or Disable by pressing Ctrl
+ S to cycle the options.
A Device Name of up to 24 character can be entered to name the
selected hub. The Device Role panel displays a hub as Master or
Slave.
The new settings must be saved before taking effect.
Group Number (Unit ID):
-----------------------------------------------
Group Status:
Group Admin. State:
Device Serial Number: 00000000
Device Name:
Device Role:
PRE GROUP NEXT GROUP
Figure 4.19 Repeater Group Control/Status Menu
WH-2400M/WH-2400S
-Repeater Group Control/Status Menu-
Operation
< Enable >
[
Master
SAVE
[ 1 ]
EXIT
TO MAIN MENU
Console Operations
]
HELP
PLANET Web Hub
Advertisement
Table of Contents
