Table of Contents
Advertisement
Console Operations
b. Repeater Port Control/Status
Repeater Port Control/Status menu is used to view the status and
configure the ports of the hubs in the stack. Select the Hub ID in the
Group Number panel, then select the Port Number.
The Port Status will be displayed and Port State and Port Name can
be configured for ports that are Link Up or Link Down.
>>Group Number: [ 1 ]
----------------------------------------------------------------------------
Port Status:
Port State:
Port Name: [
PRE GROUP
NEXT PORT
WH-2400M / WH-2400S User's Manual
WH-2400M/WH-2400S
Repeater Port Control/Status Menu
Link:
Link Polarity:
Auto Partition:
Interface Type:
Operation Status:
Link Test
Auto Polarity Reversal
Administrator State
PRE GROUP NEXT GROUP
Figure 4.20 Repeater Port Control/Status Menu
Port Number: [ 1 ]
Link Up / Link Down
Normal / Reversed
Not Partitioned / Auto Partitioned
10Base / AUI / UpLink
Yes
< Enable >
Enable
< Disable >
] (max 8 bytes)
SAVE EXIT
TO MAIN MENU
HELP
4-17
Advertisement
Table of Contents
