Controls And Functions - WAGNER Control Stainer 150 Owner's Manual

controls anD FUnctions

=
=
=
=
=
=
=
=
=
on / oFF switch
The ON/ OFF switch turns the turbine ON (I)
and OFF (0).
No spray material will be delivered until trigger
is pulled.
Material Flow control
The material flow control knob determines the
amount of spray material that is sprayed from
the spray nozzle.
triGGer
Pulling the trigger will deliver spray material
from the material container to the nozzle
assembly, where it is sprayed.
KicKstanD
The kickstand allows the sprayer to be set
down on a flat, even surface when using a
larger material container.
air caP
Round pattern (use 'up and down' or 'side to
side' spraying motion)
Horizontal pattern (use 'up and down' spraying
motion)
Vertical pattern (use 'side to side' spraying
motion)
en
5