Dc Usage; Stopping The Generator - GENPOWER GXS14000D Series User Manual

10 1200 2400
NR
250 150 100 50
15 1800
3600
NR
150 100
65
NR
20 2400 4800 175 125 75 50
NR
25 3000 6000 150 100 60
NR NR
30 3600 7200 125 65
NR NR NR
·NR= not recommended
Table 3· Maximum Extension Cord Lengths
by
Power Requirement
DC Usage
The generator is equipped with a DC terminal. This terminal is not intended for use to charge
automotive batteries.
STOPPING
THE
GENERA
TOR
To stop the generator:
I. Turn off, then unplug all connected electrical devices.
2. Allow tbe generator to run for several more minutes with no electrical devices connected.
This helps stabilize the temperature of the generator.
3. Turn the engine switch key to the "off' position. Remove the key.
• WARNING: Allow the generator to cool for several minutes before touching areas that
become hot during usage.
CAUTION: Leaving the battery connected for long periods of time without using the
generator can cause the battery to drain. Disconnect the negative battery cable from the
battery for storage. After disconnecting the cable, cover the free end with an insulator such
as electrical tape.
13