Front Fog Light Assembly - Subaru legacy 2003 Service Manual

LIGHTING SYSTEM

16.Front Fog Light Assembly

A: REMOVAL
1. EXCEPT OUTBACK
1) Disconnect ground cable from battery.
2) Remove two clips and lower the mudguard.
3) Disconnect harness connector.
4) Remove mounting bolts, and then detach fog
light assembly.
2. OUTBACK
1) Disconnect ground cable from battery.
2) Turn stone guard counterclockwise, and then re-
move it.
FRONT FOG LIGHT ASSEMBLY
LI-00084
LI-00085
LI-00086
LI-20
3) Remove mounting bolts.
4) Remove two clips and lower the mudguard.
5) Disconnect harness connector (a).
6) Remove nut (b) then detach fog light assembly.
B: INSTALLATION
Install in the reverse order of removal.
LI-00087
LI-00084
( b )
( a )
LI-00088