High-Mounted Stop Light - Subaru legacy 2003 Service Manual

25.High-mounted Stop Light

A: REMOVAL
1. SEDAN
1) Disconnect ground cable from battery.
2) Disconnect connector of high-mounted stop light
from body harness.
3) Remove bolts, then detach high-mounted stop
light assembly.
2. WAGON
1) Disconnect ground cable from battery.
2) Remove cap (a) by prying on the edge with a
screwdriver.
3) Remove screws (b) and then detach cover (c).
4) Remove screws (d) and then detach high-
mounted stop light while disconnecting connector.
( d )
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATIONS, General Description.>
3) If NG, replace the bulb with a new one.
HIGH-MOUNTED STOP LIGHT
LI-00108
( c )
( b )
( a )
LI-00036
LI-29
LIGHTING SYSTEM