Glove Box Light - Subaru legacy 2003 Service Manual

GLOVE BOX LIGHT

LIGHTING SYSTEM
31.Glove Box Light
A: REMOVAL
1) Disconnect ground cable from battery.
2) Remove glove box. <Ref. to EI-32, REMOVAL,
Glove Box.>
3) Disconnect harness connector.
4) Remove glove box light.
LI-00111
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATIONS, General Description.>
3) If NG, replace the bulb with a new one.
LI-35