Front Fog Light Bulb - Subaru legacy 2003 Service Manual

17.Front Fog Light Bulb

A: REMOVAL
1. EXCEPT OUTBACK
1) Disconnect ground cable from battery.
2) Remove the two clips and lower the mudguard.
3) Disconnect harness connector.
4) Remove back cover (A).
5) Remove spring retainer then detach fog light
bulb.
2. OUTBACK
1) Remove fog light assembly. <Ref. to LI-20,
OUTBACK, REMOVAL, Front Fog Light Assem-
bly.>
2) Disconnect harness connector.
3) Loosen screws and turn the bulb assembly
counterclockwise, and then detach the bulb.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2, PRE-
CAUTIONS, General Description.>
3) If NG, replace the bulb with a new one.
FRONT FOG LIGHT BULB
LI-00084
( A )
LI-00089
LI-21
LIGHTING SYSTEM