Rear Turn Signal Light Bulb - Subaru legacy 2003 Service Manual

LIGHTING SYSTEM

22.Rear Turn Signal Light Bulb

A: REMOVAL
1. SEDAN
1) Open trunk lid and remove cover.
2) Turn the socket and remove the bulb.
2. WAGON
1) Remove rear combination light assembly. <Ref.
to LI-22, WAGON, REMOVAL, Rear Combination
Light Assembly.>
2) Remove the light cover mounting screws then
detach the cover.
3) Turn the socket and remove the bulb.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATIONS, General Description.>
3) If NG, replace the bulb with a new one.
REAR TURN SIGNAL LIGHT BULB
LI-00104
LI-00105
LI-26