Fixture Exterior View; Installation; Connection To Mains; Mounting The Fixture - Robe Strobe IP User Manual

2. Fixture exterior view

3. Installation

3.1 Connection to mains

Fixtures must be installed by a qualified electrician in accordance with all national
The Strobe IP is equipped with auto-switching power supply that automatically adjusts to any 50-60Hz AC power
source from 100-240V (CE) or 100-277 V (US). The fixture must be connected to a non-dimmable power source in
order to avoid damage to its internal power supply and other electrical components.
Connect the fixture to the mains by means of inbuilt power cord with the plug.

3.2 Mounting the fixture

The Strobe IP can be arranged in any position/orientation without altering its operation characteristics. The LED
module can be tilted to desired position by means of the tilt lock. Use an Allen key 6 to adjust desired tilt position.
1. Head with LED array
2. Tilt lock
3. Base
4. Power and DMX connection
5. Rubber legs
and local electrical and construction codes and regulations.
This device falls under class one and must be grounded!
Strobe IP
5