Lever (Ldg-A)/(Ldg-B); Gear (Ldg-Ft) - Sony XR-CA600 Service Manual

3-3. LEVER (LDG-A) / (LDG-B)
shaft A
1 Fit the lever (LDG-A) on
shafts A – C and install it.
3-4.

GEAR (LDG-FT)

hole
hole
4 Align hole in the gear (LDG-D)
with hole the lever (LDG-A).
2 tension spring (LD-2)
shaft B
shaft C
gear (LDG-D)
5 gear (LDG-FT)
lever (LDG-A)
gear (LDG-FB)
XR-CA600/CA600V/CA600X
3 type-E stop ring 2.0
2 Fit the lever (LDG-B) on
1
2 tension spring (LD-1)
shaft A
shaft B
shafts A and B and
install it.
6 polyethylene washer
3 Move the lever (LDG-B)
in the arrow direction.
11