Checking Peak Control Status - LG ACP IV ACP Owner's Manual

Checking Peak Control Status

You can check the Peak Control configuration status as follows.
1.
In the main menu, click(touch) the [AutoLogic > Peak Control] menu icon.
2.
Check how Peak Control is configured.
Item
Configure Peak Controls.
y Operation Status
(Operation Status - Priority Control selected)
y Operation
Control
Configuration
Area
y ShiftTime(Min.): The cycle by which the operation switches over.
y Target ratio(%): Displays the target operation rate.
y Current Running(%): Displays the current rate.
(Operation Status - Outdoor unit capacity control selected)
y Operation
y Target ratio(%): Displays the target operation rate.
- Can be configured in [Environment > Advance Setting].
- Priority: Controls based on group priority
- Outdoor unit capacity control: Controls based on outdoor unit capacity
limit.
- [Run] Button: Operates the device.
- [Stop] Button: Stops the operation of the device.
- [Run] Button: Operates the device.
- [Stop] Button: Stops the operation of the device.
USING THE PROGRAM
Description
73