LG ACP IV ACP Owner's Manual page 115

AHU
Item
Select a device type.
Device Type
y AHU
Enter the device name.
Unit Name
y A central control address value is a number between 00 and 1F. You
(20 Characters)
Type the central control address of the device.
Address
y A central control address value is a number between 00 and FF. You
(00-FF)
Type the device model.
Model
(20 Characters)
y Up to 20 characters.
Type the maximum capacity in thousand BTUs for devices.
Capacity
y Up to 5 characters.
y The capacity of the actual device cannot exceed the input value.
y It is used when you need to add several devices of the same type.
y Select check box, input the desired number of devices, and the devices
Add at once
Room Temp Select indoor temperature setting base(air supply/ventilation).
Select a AHU type.
Type
y Normal, Fresh Air, Heat Recovery, Modular Fresh Air, Modular Heat
NOTES
Address of the products linked to the MODBUS communication system recommend a number
y
between 01~F7.
DOAS fixes the room temperature setup standard as "air supply".
y
cannot type the same value for similar devices.
cannot type the same value for similar devices.
are added at once, and the device name and address are automatically
increased.
(During the Add all, if duplicate address value occurs, the information
notice message for the duplicate address is displayed.)
Recovery, DOAS.
USING THE PROGRAM
Description
107