Update Cycle (seconds)
You can configure the update cycle of the remote control service information as follows.
1.
In the main menu, click(touch) the [Environment] menu icon.
2.
In the Settings list, click(touch) TMS Setting.
3.
In the detailed settings list, click(touch) Update Cycle (seconds).
4.
When the Configuring Update Cycle window appears, click(touch) an update cycle you want.
Site address
You can type the address of the site where ACS IV Controller is installed.
1.
In the main menu, click(touch) the [Environment] menu icon.
2.
In the Settings list, click(touch) TMS Setting.
3.
In the detailed settings list, click(touch) Site address.
4.
When the Configuring Site Information window appears, enter the site address and click(touch)
the [Confirm] button.
USING THE PROGRAM
167