Checking The Settings Using The I80 Setup Utility - Canon BU-10 User Manual

Checking the Settings Using the i80 Setup
Utility
The i80 Setup Utility software is used to set up the Bluetooth unit connected
to the printer. Installing the printer driver using the printer software CD-ROM
will automatically install the i80 Setup Utility.
This section describes the operation procedures for checking the settings of
the Bluetooth unit using the i80 Setup Utility as preparation for Bluetooth
printing.
For more information about the i80 Setup Utility, refer to
Utility.
Note
1
Check that the printer and computer are connected by the USB cable.
2
Click Start Start and select All Programs
Start Start
Setup Utility. Setup Utility Setup Utility Setup Utility
Alternatively, double-click the i80 Setup Utility
The i80 Setup Utility will start.
3
Click Change Change from Bluetooth Settings. Change Change
12
The i80 Setup Utility is used to set up the media type, size
and print layout to print via infrared communication with the
PDA or a mobile telephone. For more information on settings
for printing via infrared communication, refer to the
Start Guide
.
All Programs, Canon Utilities
All Programs All Programs
i80 Setup Utility icon on the desktop. i80 Setup Utility i80 Setup Utility
Using the i80 Setup
Canon Utilities, i80 Setup Utility i80 Setup Utility and i80
Canon Utilities Canon Utilities i80 Setup Utility i80 Setup Utility
Quick
i80
i80 i80