Figure 17
ARMREST HEIGHT ADJUSTMENT
1. Loosen the two armrest height adjustment screws on the outside of the armrest with a
3mm Allen wrench until you can slide the armrest up and down freely. See figure 17.
2. Raise or lower the armrest to the desired position.
3. Retighten the two adjustment screws to lock the armrest into that position.
4. Repeat steps 1-3 to adjust the opposite arm.
ARMREST WIDTH ADJUSTMENT
1. Loosen the adjustment knob at the rear of the seat. See figure 18.
2. Slide the arms in or out to the desired width.
3. Tighten the adjustment knob to secure the arm.
4. Repeat steps 1-3 to adjust the opposite arm.
JOYSTICK BRACKET LENGTH ADJUSTMENT
1. Loosen the adjustment knob. See figure 19.
2. Slide the joystick holder in or out to the desired position.
3. Tighten the adjustment knob.
COMFORT SETTINGS
Allen
Screws
(3mm)
Joystick Adjustment Knob
Adjustment
Knob
Figure 19
20
Figure 18