HEADREST HEIGHT ADJUSTMENT
1. Standing behind the chair, push and then release the clamp on the left post of the
headrest while you are pulling up or pushing down on the head rest. See figure 12.
2. The headrest will "click" to a stop in one of the preset positions.
3. Repeat step 1 until the headrest is at the desired height.
BACKREST ANGLE ADJUSTMENT
The backrest can be folded down to minimize chair height during transport.
1. Pull up on the adjustment lever (see figure 13) and push against the back rest until
the backrest is in the desired position.
2. Release the lever.
3. To return the backrest to the upright position, pull up on the lever and move the
backrest to the desired position.
ARMREST ANGLE ADJUSTMENT
1. Lift armrest up. See figure 14.
2. Turn jam nut counter-clockwise with a 14mm wrench to loosen.
3. Turn the adjustment bolt using a 6mm Allen wrench to raise or lower the armrest
angle. Turning the bolt counter-clockwise will raise the angle. Turning the bolt clockwise
will lower the angle. Turn until desired angle is reached.
4. Re-tighten jam nut by turning clockwise.
5. Repeat steps 1-4 on the other armrest.
Jam Nut
(14mm)
COMFORT SETTINGS
Headrest Clamp
Figure 12
Backrest Angle
Adjustment Lever
Figure 14
Figure 14
18
Figure 13
Adjustment Bolt
(6mm Allen)