Network Test Procedure; Configuration; Equipment Needed; Configure The Computer And Verify Correct Communications - Enfora MT 3000 User Manual

6 Network Test Procedure

6.1 Configuration

The Enfora Mobile Tracker family of products is designed with features to support a robust connection with
the network. However, there can be conditions when the connection to the network or the ability to
transfer data across the network is beyond the control of the device alone.

6.2 Equipment Needed

In this example the requirements are:
GSM2374 MT 3000
l
Computer with one available Serial port or USB-to-serial converter
l
GSM/GPRS SIM with GPRS data enabled.
l
An APN (Access Point Name).
l
Username and Password, if GPRS is operating on a non-transparent network.
l
Note: If you don't know the name of the APN you need to use, please contact your cellular
network carrier for that information. Once you have acquired this information, please
complete Application Note GSM0000AN019 – GSM Network Configuration Worksheet and
keep this worksheet for future reference.
6.3 Configure the Computer and Verify Correct
Communications
Please refer to Enfora document ENF0001IN001 – USB Installation Guide for detailed instructions for
installing USB drivers and connecting with the modem.

Configure the Device to Communicate with the Enfora Server

- 24 -