Sudden Deceleration (Harsh Braking); Motion Detection; Obdii Basic Event Data - Enfora MT 3000 User Manual

Sets Rapid accel threshold 1 to .2Gs. If this threshold is exceeded for 1 second, trigger the input event. This
event will clear in 30 seconds below this treshold.

Sudden Deceleration (Harsh Braking)

Rapid deceleration events can be triggered when one of three available vehicle speed thresholds are
exceeded as determined by the accelerometer in milli-Gs (e.g. 1.0) for a defined period of time in seconds
(30 seconds).
AT$OBDDCL=1,.500,1,3
Sets Rapid decel threshold 1 to .5Gs. If this threshold is exceeded for 1 second, trigger the input event. This
event will clear in 30 seconds below this treshold.

Motion Detection

Motion alerts for vehicles can be configured to communicate that a vehicle is being towed. Motion
detection based on measuring movement via the accelerometer occurs when the vehicle ignition is off,
and the vehicle is stationary.
A motion alert is triggered when motion defined in milli-Gs is detected for a defined period of time.

OBDII Basic Event Data

Four additional data items can be included with event messages:
VIN
l
Firmware version ($PKG)
l
OBD Protocol (i.e. J1850 PWM)
l
Cellular signal strength (RSSI)
l
- 20 -