Demo Configuration To The Enfora Test Server; Reset The Modem To Factory Defaults; Connecting The Mini Mt To The Enfora Test Server - Enfora Mini MT User Manual

Personal asset tracking device.

Hide thumbs Also See for Mini MT:

Table of Contents

14. You should see the following screen with the response from the Mini MT:

15. The response "Enfora, Inc." indicates that you are successfully communicating with the Enfora Mini

MT.

4.8 Demo Configuration to the Enfora Test Server

The Mini MT is capable of communicating with a server. The following steps will guide you through a

configuration that will demonstrate the data communication capabilities to the Enfora Test Server. A valid

SIM card from your carrier is required that allows GPRS data communications capability.

To restore the Mini MT to factory defaults send the following command:

AT&F<CR>

To save the current configuration to memory send the following command:

AT&W<CR>

Reset the modem with the following command:

AT$RESET<CR>

The following information will be required from the SIM card provider (refer to GSM0000AN019 – Network

Configuration Worksheet):

 APN

 Username (if required)

 Password (if required)

 SIM PIN (if required)

The following examples show how to configure the Mini MT with a Cingular SIM card with the following

data:

 APN=isp.cingular

 Username=ISP@CINGULARGPRS.COM

 Password=CINGULAR1

 SIM PIN=1234

Table of Contents

Gsm2428