Device Installation - Enfora MT 3000 User Manual

5.2 Device Installation

Instructions provided in this section describe the hardware installation of the MT 3000 device. To install
the MT 3000 in a vehicle, follow these steps:
Locate the OBDII socket. The location will vary between different vehicle manufacturers, models,
l
and production years.
Do not use this product on '06 or '07 Ford F-150 trucks. Faulty wiring in these vehicles
may cause a fire.
Warning: The MT 3000 is NOT a waterproof or sealed device. Care must be taken to
ensure the device is kept away from water or any other liquids.
Carefully insert the MT 3000 into the OBDII socket.
After the device is installed, ensure the device is working properly as evidenced by a GPS lock and cel-
l l
lular connection, which can be validated by the LEDs.
- 22 -