Table of Contents
Advertisement
Quick Links
INA2180-2181 Evaluation Module User's Guide
This user's guide describes the characteristics, operation, and use of the INA2180-2181 evaluation
module (EVM). This EVM is designed to evaluate the performance of the
INA2180A3, INA2180A4, INA2181A1, INA2181A2, INA2181A3, INA2181A4
monitors in a variety of configurations. This document includes a schematic, reference printed-circuit
board (PCB) layouts, and a complete bill of materials.
SBOU188 – August 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
SBOU188 – August 2017
INA2180A1, INA2180A2,
voltage output current-shunt
INA2180-2181 Evaluation Module User's Guide
User's Guide
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Texas Instruments INA2180-2181
Summary of Contents for Texas Instruments INA2180-2181
- Page 1 User's Guide SBOU188 – August 2017 INA2180-2181 Evaluation Module User's Guide This user’s guide describes the characteristics, operation, and use of the INA2180-2181 evaluation module (EVM). This EVM is designed to evaluate the performance of the INA2180A1, INA2180A2, INA2180A3, INA2180A4, INA2181A1, INA2181A2, INA2181A3, INA2181A4 voltage output current-shunt monitors in a variety of configurations.
-
Page 2: Table Of Contents
INA218x Device Summary ..................INA2180-2181EVM Kit Contents ..................... Related Documentation ......................Bill of Materials Trademarks All trademarks are the property of their respective owners. INA2180-2181 Evaluation Module User's Guide SBOU188 – August 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 3: Overview
PCBs - one for each of the eight devices (INA2180A1, INA2180A2, INA2180A3, INA2180A4, INA2181A1, INA2181A2, INA2181A3 and INA2181A4). SBOU188 – August 2017 INA2180-2181 Evaluation Module User's Guide Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 4: Quick Start Setup And Use
Cx2 (Cx3 for Channel 2), form an input filter. These locations allow for 0805 surface- mount package size. Additional information regarding the use of input filtering is provided in the INA2180 INA2181 product data sheets. INA2180-2181 Evaluation Module User's Guide SBOU188 – August 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 5: Reference Voltage Setup
REF2) needs to be connected to GND. You can connect the REF1 pin (REF2 for Channel 2) to GND through a 0-ohm resistor (Rx5 and Rx6) or ground it directly. SBOU188 – August 2017 INA2180-2181 Evaluation Module User's Guide Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 6: Ina2180-2181Evm Schematic And Pcb Layout
The figures are not intended to be used for manufacturing INA2180-2181EVM PCBs. Schematic Figure 1 shows the schematic for the INA2180-2181EVM PCB. Figure 1. INA2180-2181EVM Schematic INA2180-2181 Evaluation Module User's Guide SBOU188 – August 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 7: Ina2180-2181Evm Top Overlay
Figure 2 through Figure 6 illustrate the PCB layout for the INA2180-2181EVM. Figure 2. INA2180-2181EVM Top Overlay Figure 3. INA2180-2181EVM Top Solder Mask SBOU188 – August 2017 INA2180-2181 Evaluation Module User's Guide Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 8: Ina2180-2181Evm Top Layer
INA2180-2181EVM Schematic and PCB Layout www.ti.com Figure 4. INA2180-2181EVM Top Layer Figure 5. INA2180-2181EVM Bottom Layer INA2180-2181 Evaluation Module User's Guide SBOU188 – August 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 9: Ina2180-2181Evm Drill Drawing
INA2180-2181EVM Schematic and PCB Layout www.ti.com Figure 6. INA2180-2181EVM Drill Drawing SBOU188 – August 2017 INA2180-2181 Evaluation Module User's Guide Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 10: Bill Of Materials
Texas Instruments Output, Current-Sense Amplifiers, DGK0008A (VSSOP-8) Bidirectional, Low- and High-Side Measurement, Multichannel, Voltage DGK0008A INA2180A2DGK Texas Instruments Output, Current-Sense Amplifiers, DGK0008A (VSSOP-8) INA2180-2181 Evaluation Module User's Guide SBOU188 – August 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... - Page 11 CAP, CERM, 0.1 µF, 50 V, +/- 5%, X7R, C33, C42, C43, C52, C53, 0805 0.1 µF 0805 08055C104JAT2A C62, C63, C72, C73, C82, SBOU188 – August 2017 INA2180-2181 Evaluation Module User's Guide Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
- Page 12 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
- Page 13 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 14 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧ください。http:/ /www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 3.4 European Union 3.4.1 For EVMs subject to EU Directive 2014/30/EU (Electromagnetic Compatibility Directive): This is a class A product intended for use in environments other than domestic environments that are connected to a low-voltage power-supply network that supplies buildings used for domestic purposes.
- Page 15 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2017, Texas Instruments Incorporated...
- Page 16 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
- Page 17 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 18 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧ください。http:/ /www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 3.4 European Union 3.4.1 For EVMs subject to EU Directive 2014/30/EU (Electromagnetic Compatibility Directive): This is a class A product intended for use in environments other than domestic environments that are connected to a low-voltage power-supply network that supplies buildings used for domestic purposes.
- Page 19 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2017, Texas Instruments Incorporated...
- Page 20 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products;...
Need help?
Do you have a question about the INA2180-2181 and is the answer not in the manual?
Questions and answers