Advertisement
UNPACK THE SMITH MACHINE and ASSEMBLE BASE WELDMENTS:
NOTE: TAKE CARE WHILE OPENING THE BOXES. KEEP TRACK OF ALL ITEMS YOU REMOVE FROM
THE BOXES. TAKE CARE NOT TO LAY ITEMS ON SURFACES THAT MAY SCRATCH THE
PRODUCT.
1.
Take the (2) BASE WELDMENTS, and FEET COVERS from the packaging.
2.
Place the weldments on the floor close to the place they will be used.
3.
Using (6) M10 washer PN:731-2547 , and (6) M10 x 15mm Hex Head Bolts PN:731-2450. Bolt the
two weldment together. Tighten fasteners using a 16mm box wrench.
4.
With weldments in the desired location, place all 4 covers (PN: 731-0021) under the feet.
Page 9
Hide quick links:
Advertisement
