Advertisement
ATTACH SIDE COVERS:
1.
Before attaching the Side Covers wipe the guide rods with a clean soft cloth. Also check all fasteners
inside the frame and make sure they are tight. Unlatch the Weight Bar and move it up and down from
top to bottom to make sure it moves smoothly.
2.
Take the Side Covers and the plastic Fasteners form the packaging. NOTE: there is a right and left,
make sure the NAUTILUS logo is on the outside.
3.
Using (14) Plastic fasteners PN:731-1933 attach the Cover to the outside of the machine frame.
Press the fastener firmly into the hole until it seats completely.
GUIDE ROD
Page 15
Hide quick links:
Advertisement
