Displayed items
Item
Use the CC-Link IEF Basic
Network
[Network Configuration
Configuration
Settings] button
Settings
Refresh
Link Side
Settings
CPU Side
*1 Extended data register (D) and extended link register (W) are also included.
8 PARAMETER SETTINGS
42
8.2 Settings for the Master Station in MELSEC-Q/L
Description
Set whether to use CC-Link IE Field Network Basic.
Set the information of the slave station to the master
station. Setting items are the same as GX Works3. (
Page 35 Network Configuration Settings)
The number of points for the link devices (RX/RY, RWr/
RWw) for the number of occupied stations and start/end
device number set in the network configuration settings are
displayed.
Device
Set the device of the link refresh target.
Name
Points
The number of device points for the link refresh target is
displayed. (The same value as the number of points on the
link side is displayed.)
Start
Set the start device number within the link refresh range.
End
The end device number within the link refresh range is
displayed.
Setting range
• Checked
• Unchecked
*1
*1
X, Y, M, L, B, D
, W
, R, ZR
Follow the device settings of the
CPU parameters.
Default
Unchecked
(Empty)
(Empty)