File System Naming Conventions - HP FlexFabric 5700 series Configuration Manual

[Master-Ten-GigabitEthernet3/0/1] port link-type trunk

File system naming conventions

On a single-chassis fabric, you can use its storage device name to access its file system.
On a multichassis IRF fabric, you can use the storage device name to access the file system of the master.
To access
slotmember-ID#storage-device-name format.
For example:
To access the test folder under the root directory of the flash memory on the master device:
<Master> mkdir test
Creating directory flash:/test... Done.
<Master> dir
Directory of flash:
0 -rw-
1 drw-
2 -rw-
3 -rw-
4 -rw-
5 -rw-
6 drw-
7 drw-
8 -rw-
9 drw-
10 -rw-
11 -rw-
12 -rw-
13 -rw-
14 drw-
25 drw-
524288 KB total (365292 KB free)
To create and access the test folder under the root directory of the flash memory on member device 3:
<Master> mkdir slot3#flash:/test
Creating directory slot3#flash:/test... Done.
<Master> cd slot3#flash:/test
<Master> pwd
slot3#flash:/test
Or:
<Master> cd slot3#flash:/
<Master> mkdir test
Creating directory slot3#flash:/test... Done.
To copy the file test.ipe on the master to the root directory of the flash memory on member device 3:
# Display the current working path. In this example, the current working path is the root directory of the
flash on member device 3.
the file system of
43548660 Jan 01 2011 08:21:29
- Jan 01 2011 00:00:30
567 Jan 02 2011 01:41:54
735 Jan 02 2011 01:42:03
36 Jan 01 2011 00:07:52
0 Jan 01 2011 00:53:09
- Jan 01 2011 06:33:55
- Jan 02 2000 00:00:07
23724032 Jan 01 2011 00:49:47
- Jan 01 2000 00:00:07
591 Jan 02 2011 01:42:03
4609 Jan 01 2011 00:07:53
3626 Jan 01 2011 01:51:56
78833 Jan 01 2011 00:07:53
- Jan 01 2011 00:15:48
- Jan 01 2011 04:16:53
any other member
system.ipe
diagfile
dsakey
hostkey
ifindex.dat
lauth.dat
log
logfile
switch-cmw710-system.bin
seclog
serverkey
startup.cfg
startup.cfg_bak
startup.mdb
test
versionInfo
5
device, use the name in the