1. Manuals
  2. Brands
  3. Solution Systems Manuals
  4. Single board computers
  5. CompactPCI CPV5370-700-01
  6. Installation and reference manual

Solution Systems CompactPCI CPV5370-700-01 Installation And Reference Manual

Compactpci cpv5370 single board computer and cptm04 transition module
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Solution Systems CompactPCI CPV5370-700-01 Installation And Reference Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CompactPCI CPV5370-700-01 and is the answer not in the manual?

Questions and answers

Summary of Contents for Solution Systems CompactPCI CPV5370-700-01

  • Page 1 720-565-5995 sales@solusys.com solusys.com  We are a systems integrator and value added reseller of computer hardware System Integration and software primarily focusing on the embedded marketplace. We provide custom turnkey solutions to get your project started quickly. We pride  Consulting ourselves in our agility and ability to engineer complex solutions quickly.
  • Page 2 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com ® CompactPCI CPV5370 Single Board Computer and CPTM04 Transition Module Installation and Reference Guide CPV5370A/IH1 May 25, 2001 Edition Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com...
  • Page 3 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com © Copyright 2001 Motorola, Inc. All Rights Reserved Printed in the United States of America ® Motorola and the Motorola symbol are registered trademarks of Motorola, Inc. ® Intel and the Intel logo are registered trademarks of Intel Corporation.
  • Page 4 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Notice While reasonable efforts have been made to assure the accuracy of this document, Motorola, Inc. assumes no liability resulting from any omissions in this document, or from the use of the information obtained therein. Motorola reserves the right to revise this document and to make changes from time to time in the content hereof without obligation of Motorola to notify any person of such revision or changes.
  • Page 5 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Safety Summary The following general safety precautions must be observed during all phases of operation, service, and repair of this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this manual could result in personal injury or damage to the equipment.
  • Page 6 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Flammability All Motorola PWBs (printed wiring boards) are manufactured with a flammability rating of 94V-0 by UL-recognized manufacturers. EMI Caution This equipment generates, uses, and can radiate electro- magnetic energy. It may cause or be susceptible to electro-...
  • Page 7 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Lithium Battery Caution Caution This product contains a lithium battery to power the clock and calendar circuitry. Danger of explosion if battery is replaced incorrectly. Replace battery only with the same or equivalent type recommended by the equipment manufacturer.

  • Page 8: Table Of Contents

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Table of Contents CHAPTER 1 Hardware Preparation and Installation Introduction........................1-1 Additional Features.....................1-2 Input/Output Interfaces ..................1-3 Special Functions....................1-5 On-Board and Front Panel Components on the CPV5370 Single Board Computer.....................1-6 On-Board and Rear Panel Components on the CPTM04 Transition Module..................1-10...
  • Page 9 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Network Boot ....................3-2 Peripheral Component Interconnect (PCI) Local Bus Interface........ 3-3 CompactPCI Bus Interface ..................3-3 Peripheral Hot Swap Function ................3-3 Watchdog Timer ......................3-3 Memory Address Mapping ..................3-4 I/O Address Map .......................
  • Page 10 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com CompactFlash Master/Slave Connector on the CPTM04 Transition Module (J16) ................4-16 CPV5370 Single Board Computer, CompactPCI Bus Connectors (J1 and J2).................4-17 CPV5370 Single Board Computer, CompactPCI Rear I/O Connectors (J3, J4, and J5) ................4-19 CPTM04 Transition Module, Rear I/O Connectors (J3, J4, and J5)....4-26...
  • Page 11 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com...

  • Page 12: Measuring Local Air Temperature

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com List of Figures Figure 1-1. Block Diagram of the CPV5370 Single Board Computer ......1-4 Figure 1-2. CPV5370 Single Board Computer Front Panel ........1-7 Figure 1-3. Location of CPV5370 Single Board Computer On-Board Components ..................1-9...
  • Page 13 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com...
  • Page 14 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com List of Tables Table 1-1. Input/Output Interfaces on the CPV5370 Single Board Computer and the CPTM04 Transition Module..............1-3 Table 1-2. Front Panel Connectors, Board Connectors, and Components on the CPV5370 Single Board Computer................1-8 Table 1-3.
  • Page 15 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Table 4-3. Serial Port Connector Pin Assignments for the CPTM04 Transition Module (COM2) (J28) ................ 4-4 Table 4-4. Serial Port Connector Pin Assignments for the CPTM04 Transition Module (COM1).................. 4-5 Table 4-5. Video Connector Pin Assignments for the CPV5370 (J17) and CPTM04 (J20) Modules ..................

  • Page 16: Motorola Computer Group Documents

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Table 4-24. Signal Descriptions for the CPTM04 Transition Module, Backplane Connector (J3)...................4-27 Table 4-25. CPTM04 Transition Module, Rear I/O Connector Pin Assignments (J5)....................4-28 Table A-1. Power Requirements for the CPV5370 Single Board Computer and Transition Module ....................A-1...
  • Page 17 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com...

  • Page 18: About This Manual

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com About This Manual ® This CompactPCI CPV5370 Single Board Computer (SBC) and CPTM04 Transition Module (TM) Installation and Reference Guide describes the installation, components, and configurations of the CPV5370 SBC and TM. Use this guide for general and technical information about the CPV5370 CompactPCI System CPU.
  • Page 19 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com CPTM04 Transition Module Model The CPV5370 uses an optional transition module for peripheral and network connections required at the rear of the chassis. CPTM04 Transition Module Description Model Number CPTM04 Transition Module with front panel...
  • Page 20 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Overview of Contents This section contains a short description of the content of each chapter and appendix in this manual. This Chapter or Appendix: Gives you: Chapter 1, Hardware Preparation a product description, input/output interfaces and and Installation special functions and a block diagram.
  • Page 21 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Who Should Use This Guide The information in this guide is written for system installers, original equipment manufacturers (OEM) and technicians. The procedures assume familiarity with the safety practices and regulatory compliance required for using and modifying electronic equipment.

  • Page 22: Introduction

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com 1Hardware Preparation and Installation This chapter gives you information about: features and functions of the CPV5370 Single Board Computer (SBC) and CPTM04 Transition Module (TM) basic preparation and installation ESD precautions...

  • Page 23: Additional Features

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Hardware Preparation and Installation Additional Features The CPV5370 gives you these features: Pentium III processor Low Power module for high end embedded applications Up to 1GB on-board DRAM memory (256MB or 512MB on...

  • Page 24: Input/Output Interfaces

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Introduction Input/Output Interfaces Refer to Table 1-1 for brief descriptions of the input/output interfaces on the CPV5370 Single Board Computer and CPTM04 Transition Module. Do not use the rear panel connectors and internal connectors at the same time.

  • Page 25: Figure 1-1. Block Diagram Of The Cpv5370 Single Board Computer

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Hardware Preparation and Installation Refer to Figure 1-1 for a block diagram of the CPV5370 Single Board Computer. Clock Generator Soldered-on memory: to 512MBx8 PCI Bridge Memory Debug Memory mezzanine: to 512MBx8...

  • Page 26: Special Functions

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Introduction Special Functions The CPV5370 uses these functions designed for certain applications. Refer to Chapter 3, Functional Description for programmer’s reference information. Watchdog Timer The watchdog timer can operate in four modes: –...

  • Page 27: On-Board And Front Panel Components On The Cpv5370 Single Board Computer

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Hardware Preparation and Installation On-Board and Front Panel Components on the CPV5370 Single Board Computer The CPV5370’s front panel has connectors and switches for: Ethernet 1 and 2 (RJ-45 connectors with indicator lights) COM1 asynchronous serial port (9-pin connector) one PMC panel (keyed for 5.0V PCI)

  • Page 28: Figure 1-2. Cpv5370 Single Board Computer Front Panel

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Introduction Refer to Figure 1-2 for the location of the CPV5370 front panel components. ETHERNET ETHERNET COM 1 PMC site Video Connector Keyboard/Mouse Connector Reset LED for Power (green)/Alarm (red) LED for Hard Disk Drive (green) 2931 0401 Figure 1-2.
  • Page 29 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Hardware Preparation and Installation The CPV5370 carries components on both sides. Table 1-2 lists the connectors available to support devices. Refer to Figure 1-3. Also refer to Chapter 4, Connector Pin Assignments.

  • Page 30: Figure 1-3. Location Of Cpv5370 Single Board Computer

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Introduction Slim Line Drive Dual Memory Mezzanine Modules 2926 0301 Figure 1-3. Location of CPV5370 Single Board Computer On-Board Components http://www.motorola.com/computer/literature Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com...

  • Page 31: Table 1-3. Rear Panel And On-Board Connectors, And Components On The

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Hardware Preparation and Installation On-Board and Rear Panel Components on the CPTM04 Transition Module The CPTM04 Transition Module (Figure 1-4) has connectors on the rear panel for: keyboard/mouse (PS/2) Ethernet 1 and Ethernet 2 (RJ45)
  • Page 32 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Introduction Table 1-3. Rear Panel and On-Board Connectors, and Components on the CPTM04 Transition Module (Continued) Connector Description Keyboard/Mouse connector (external, 6-pin PS/2 female) Parallel connector (26-pin shrouded) Secondary EIDE (40-pin shrouded) CompactFlash (50-pin) http://www.motorola.com/computer/literature...

  • Page 33: Figure 1-4. On-Board Components And Rear Panel Connectors On The

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Hardware Preparation and Installation Refer to Figure 1-4 for on-board components and rear panel connectors on the CPTM04 Transition Module. Keyboard/ Mouse COM 2 VIDEO ETHERNET 2 ETHERNET 1 PIM 1 Figure 1-4.

  • Page 34: Table 1-4. Startup Overview

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Introduction Equipment Required A CPV5370 system requires this equipment: CompactPCI system enclosure system console terminal operating system disk drives Transition Module (CPTM04) and connecting cables. Overview of Startup Procedures Table 1-4 shows the things you need to do before you can use this board.

  • Page 35: Unpacking Instructions

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Hardware Preparation and Installation Unpacking Instructions Note If the shipping carton is damaged upon receipt, request that the carrier’s agent be present during the unpacking and inspection of the equipment. Unpack the equipment from the shipping carton. Refer to the packing list and verify that all items are present.

  • Page 36: Mounting Memory Mezzanine Cards

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Introduction If an ESD station is not available, you can avoid damage resulting from ESD by wearing an antistatic wrist strap (available at electronics stores) that is attached to an active electrical ground. Note that a system chassis may not be grounded if it is unplugged.

  • Page 37: Mounting Pci Mezzanine Cards

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Hardware Preparation and Installation Mounting PCI Mezzanine Cards You can mount one 32 bit, 5.0V PCI Mezzanine Card (PMC) on the PMC site. The PMC expansion runs at 33MHz. It’s I/O signals are routed to the rear transition module.

  • Page 38: Mounting The Slim Line Eide Hard Drive

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Introduction Mounting the Slim Line EIDE Hard Drive You can mount a Slim Line EIDE hard drive on the CPV5370. Refer to Figure 1-3. No configuration is required. The drive is configured as master with no jumpers installed.

  • Page 39: Connecting To Board Connectors

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Hardware Preparation and Installation Connecting to Board Connectors The CPV5370 Single Board Computer (SBC) and CPTM04 Transition Module (TM) give you board connectors for attaching peripheral devices. Before installing the SBC or TM, you may want to connect your peripheral cables to the connectors.

  • Page 40: Installing The Cpv5370 Single Board Computer And Cptm04 Transition Module

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Installing the CPV5370 Single Board Computer and CPTM04 Transition Module Installing the CPV5370 Single Board Computer and CPTM04 Transition Module Refer to Figure 1-5. To install the CPV5370 into your computer chassis: 1.

  • Page 41: Figure 1-5. Installing The Cpv5370 Single Board Computer And Cptm04 Transition Module In Your Computer Chassis

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Hardware Preparation and Installation 8. Verify that the CPV5370 is properly seated and secure it to the chassis using the two screws located adjacent to the injector/ejector levers. 9. Connect the appropriate cables to the CPV5370 10.

  • Page 42: Replacing Lithium Batteries

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Replacing Lithium Batteries Replacing Lithium Batteries Follow these safety rules for proper battery operation and to reduce equipment and personal injury hazards when handling lithium batteries. Use the battery for its intended application only.
  • Page 43 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Hardware Preparation and Installation Danger of explosion if battery is replaced incorrectly. Replace only with the same or equivalent type recommended by the Caution equipment manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

  • Page 44: Switches And Indicators

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com 2Starting Up the CPV5370 Single Board Computer Introduction This chapter gives you information about: the power-up procedure switches and indicators Note This document treats the CPV5370 SBC as a component of a system, and assumes that you install it in a CompactPCI backplane that is PICMG compliant.
  • Page 45 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Starting Up the CPV5370 Single Board Computer Switches and Indicators You can access a push button reset switch through the CPV5370 Single Board Computer (SBC) front panel. This switch is not programmable.

  • Page 46: Introduction

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com 3Functional Description Introduction This chapter gives you information about: the PhoenixBIOS the Peripheral Component Interconnect (PCI) Bus the watchdog timer memory address mapping the I/O address map Field Programmable Gate Array (FPGA) registers The CPV5370 BIOS is similar to the CPV5350 BIOS.

  • Page 47: Headless Operation

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Functional Description A CPV5370 circuit monitors system power and provides the PWROK signal to the PIIX4E. The PIIX4E distributes the reset to the rest of the board by generating the CPU, PCI, and IDE resets. You can also reset the board using the front panel reset switch and the FPGA watchdog timer.

  • Page 48: Peripheral Component Interconnect (Pci) Local Bus Interface

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Peripheral Component Interconnect (PCI) Local Bus Interface Peripheral Component Interconnect (PCI) Local Bus Interface The PCI local bus is a high-performance, 32-bit bus with multiplexed address and data lines. Use it as an interconnect mechanism between highly-integrated peripheral controller components, peripheral add-in boards and processor/memory systems.

  • Page 49: Table 3-1. Memory Addresses And Descriptions

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Functional Description You can program the watchdog timer via registers in the ISA I/O memory map. The watchdog timer is protected from being accidentally enabled and can support a range of count down time-outs up to eight minutes.

  • Page 50: Table 3-2. I/O Addresses And Descriptions

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com I/O Address Map I/O Address Map Table 3-2 shows I/O addressing. You can use BIOS Setup or special utilities to enable or relocate these features from their default values. Table 3-2. I/O Addresses and Descriptions...

  • Page 51: Field Programmable Gate Array Registers

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Functional Description Table 3-2. I/O Addresses and Descriptions (Continued) Address (hex) Size Description 0377 1 byte Secondary IDE Channel Status Port 0378 - 037F 8 bytes LPT1 03F0 - 03F5 6 bytes...

  • Page 52: Table 3-3. System Management Modes

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Field Programmable Gate Array Registers When a system management event occurs, the input causing the event latches and remains latched until cleared by the system software. The system management hardware notifies the system of the event depending on the mode selected by the user.

  • Page 53: Table 3-5. Map Of The Fpga Register Set

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Functional Description Refer to Table 3-5 for a map of the FPGA register set. Table 3-5. Map of the FPGA register set DEVICE 00h DEVICE 10h DEVICE 11h DEVICE 14h LAN A Ctrl...
  • Page 54 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Field Programmable Gate Array Registers CPU TEMP ALARM (Bit 0) This signal connects to the CPU thermal monitor chip alert (MAX1617) output. The input is latched when active and cleared via the LEN register.

  • Page 55: Table 3-7. Bit Descriptions For The Watchdog Timer Register

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Functional Description Watchdog Timer Register Refer to Table 3-7 for Watchdog Timer Register (WDCFG) bit descriptions. Table 3-7. Bit descriptions for the Watchdog Timer register 7 (most 0 (least significant bit)

  • Page 56: Table 3-8. Bit Values For Selecting Watchdog Timeout Time

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Field Programmable Gate Array Registers SEL0 (Bit 0), SEL1 (Bit 1) and SEL2 (Bit 2) Use SEL0, SEL1 and SEL2 to select the watchdog timeout time. Writing to these bits does not clear or reset the watchdog timer. Refer to Table 3-8.

  • Page 57: Table 3-10. Soft_Rst Bit 5 Settings

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Functional Description SOFTRST (Bit 5) Use this bit to change the Watchdog Reset function to Soft reset. Refer to Table 3-10. This bit clears on power-up reset. Table 3-10. SOFT_RST bit 5 settings...

  • Page 58: Table 3-11. Bit Descriptions For The Intum Register

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Field Programmable Gate Array Registers Interrupt Selection Register Use the Interrupt Selection Register (INTUM) to select the desired IRQ line. Refer to Table 3-11. This IRQ can then be generated by a watchdog Timeout or ENUM-.

  • Page 59: Table 3-12. Bit Values For Determining Driven Irq Lines

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Functional Description IRQSL0 (Bit 0), IRQSL1 (Bit 1), IRQSL2 (Bit 2) and IRQSL3 (Bit 3) These bits determine which IRQ is driven when an IRQ event triggers. Refer to Table 3-12.

  • Page 60: Table 3-13. Bit Descriptions For The Scien Register

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Field Programmable Gate Array Registers SCI Enable Register The SCI Enable Register (SCIEN) defines the type of events that can generate an SCI. Refer to Table 3-13. Table 3-13. Bit descriptions for the SCIEN register...

  • Page 61: Table 3-14. Bit Descriptions For The Nmien Register

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Functional Description NMI Enable Register The NMI Enable Register (NMIEN) defines the events that can generate an NMI. Refer to Table 3-14. Table 3-14. Bit descriptions for the NMIEN register 7 (most...

  • Page 62: Table 3-15. Bit Descriptions For The Irqen Register

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Field Programmable Gate Array Registers IRQ Enable Register The IRQ Enable Register (IRQEN) defines the events that can generate an IRQ. The IRQ generated is set by IRQ Select Register (IRQNUM). Refer Table 3-15.

  • Page 63: Table 3-16. Bit Descriptions For The Alen Register

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Functional Description Alarm Enable Register The Alarm Enable Register (ALEN) defines the events that generate an alarm output. Refer to Table 3-16. Table 3-16. Bit descriptions for the ALEN register 7 (most...

  • Page 64: Table 3-17. Bit Descriptions For The Len Register

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Field Programmable Gate Array Registers Latch Enable Register The Latch Enable Register (LEN) resets latches in the Field Programmable Gate Array (FPGA) for the FAN, TEMP, ALARM_B, ALARM_B and ENUM alarms. Refer to Table 3-17.
  • Page 65 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Functional Description ALARM_A (Bit 3) - LM81 Alarm A Signal This bit is set automatically when an ALARM_A event is signaled by the on-card LM81 Write a logic 1 to clear any latched ALARM_A events...

  • Page 66: Power-On Status Register

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Field Programmable Gate Array Registers Power-On Status Register The Power-On Status Register (POS) checks for power-on condition. You can also read back written bits. Refer to Table 3-18. Table 3-18. Bit descriptions for hte Power-On Status register...

  • Page 67: Table 3-19. Bit Descriptions For The Lan A Register

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Functional Description LAN A Control Register Use the LAN A Control Register (LNACTRL) to control the on-card LAN A controller. Bits written can also read back. Refer to Table 3-19. Table 3-19. Bit descriptions for the LAN A register...

  • Page 68: Table 3-20. Bit Descriptions For The Lan B Register

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Field Programmable Gate Array Registers LAN B Control Register Use the LAN B Control Register (LNBCTRL) to control the on-card LAN B controller. Bits written can also read back. Refer to Table 3-20.

  • Page 69: Table 3-21. Bit Descriptions For The Flash Bios Control Register

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Functional Description Flash BIOS Control Register Use the Flash BIOS Control Register (FLBCTRL) to control which bank on the BIOS flash memory part is to be accessed. Bits written can also read back.

  • Page 70: Jump To User Code In Alternate Flash Bank

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Jump to User Code in Alternate Flash Bank Jump to User Code in Alternate Flash Bank The flash device for the BIOS is a 4MB part consisting of eight 512K banks. The BIOS occupies bank 0 only.
  • Page 71 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Functional Description 3-26 Computer Group Literature Center Web Site Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com...

  • Page 72: Ethernet Connectors

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com 4Connector Pin Assignments This chapter gives you connector pin assignments for CPV5370 Single Board Computer (SBC) and CPTM04 Transition Module (TM) connectors. Current revisions of the CPV5370 do not support PMC (PCI Mezzanine Card) Interface Modules (PIMs) requiring +12.0V.

  • Page 73: Table 4-1. Ethernet Connector Pin Assignments For The Cpv5370 Single Board Computer And Cptm04 Transition Module

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Connector Pin Assignments Table 4-1. Ethernet Connector Pin Assignments for the CPV5370 Single Board Computer and CPTM04 Transition Module (Continued) Signal Signal Description Number Mnemonic Differential receive lines Computer Group Literature Center Web Site Solution Systems Technologies Inc.

  • Page 74: Table 4-2. Serial Port Connector Pin Assignments For The Cpv5370

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Serial Port Connectors Refer to Table 4-2 for serial port connector pin assignments for the: CPV5370 Single Board Computer – COM 1 (Serial Port 1) (J19) Refer to Table 4-3 Table 4-4...

  • Page 75: Table 4-3. Serial Port Connector Pin Assignments For The Cptm04

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Connector Pin Assignments Table 4-3. Serial Port Connector Pin Assignments for the CPTM04 Transition Module (COM2) (J28) Single Signal Description Number Mnemonic Data set has detected the data carrier Receives serial data input from...

  • Page 76: Table 4-4. Serial Port Connector Pin Assignments For The Cptm04 Transition Module (Com1)

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Table 4-4. Serial Port Connector Pin Assignments for the CPTM04 Transition Module (COM1) Signal Signal Description Signal Signal Number Mnemonic Number Mnemonic Description Data set has detected Data set is ready to...

  • Page 77: Table 4-5. Video Connector Pin Assignments For The Cpv5370 (J17) And

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Connector Pin Assignments Video Connector for the CPV5370 (J17) and CPTM04 (J20) Modules Table 4-5. Video Connector Pin Assignments for the CPV5370 (J17) and CPTM04 (J20) Modules Signal Signal Description Number...

  • Page 78: Table 4-6. Keyboard/Mouse P/S2 Connector Pin Assignments For The Cpv5370

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Keyboard/Mouse P/S2 Connector for the CPV5370 and CPTM04 Modules Table 4-6. Keyboard/Mouse P/S2 Connector Pin Assignments for the CPV5370 (J7) and CPTM04 (J24) Modules Signal Signal Description Number Mnemonic KBDDAT Data line for keyboard...

  • Page 79: Table 4-7. Keyboard/Mouse/Power Led Connector Pin Assignments For The Cptm04 Transition Module

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Connector Pin Assignments Keyboard/Mouse/Power LED Connector for the CPTM04 Transition Module Table 4-7. Keyboard/Mouse/Power LED Connector Pin Assignments for the CPTM04 Transition Module Signal Signal Signal Signal Number Mnemonic Description Number...

  • Page 80: Table 4-9. Parallel Connector Pin Assignments On The Cptm04

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Parallel Connector on the CPTM04 Transition Module Table 4-9. Parallel Connector Pin Assignments on the CPTM04 Transition Module Signal Signal Signal Signal Number Mnemonic Description Number Mnemonic Description STROBE- Indicates data at...

  • Page 81: Table 4-10. Eide Connector Pin Assignments For The Cptm04

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Connector Pin Assignments EIDE Connector for the CPTM04 Transition Module Table 4-10. EIDE Connector Pin Assignments for the CPTM04 Transition Module Signal Signal Description Signal Signal Description Number Mnemonic Number Mnemonic...

  • Page 82: Compactflash Connector For The Cptm04 Transition Module

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com CompactFlash Connector for the CPTM04 Transition Module Table 4-11. CompactFlash Connector Pin Assignments for the CPTM04 Transition Module Signal Signal Description Signal Signal Description Number Mnemonic Number Mnemonic Ground Drive data line...

  • Page 83: Table 4-11. Compactflash Connector Pin Assignments For The Cptm04 Transition Module

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Connector Pin Assignments Table 4-11. CompactFlash Connector Pin Assignments for the CPTM04 Transition Module (Continued) Signal Signal Description Signal Signal Description Number Mnemonic Number Mnemonic Drive data line PDIAG- Output from drive 1...

  • Page 84: Floppy Connector For The Cptm04 Transition Module

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Floppy Connector for the CPTM04 Transition Module Table 4-12. Floppy Connector Pin Assignments for the CPTM04 Transition Module Signal Signal Signal Signal Description Number Mnemonic Description Number Mnemonic Ground DRVDENS0 Disk density select...

  • Page 85: Table 4-12. Floppy Connector Pin Assignments For The Cptm04 Transition Module

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Connector Pin Assignments Table 4-12. Floppy Connector Pin Assignments for the CPTM04 Transition Module (Continued) Signal Signal Signal Signal Description Number Mnemonic Description Number Mnemonic Ground WPROT- Indicates a disk is...

  • Page 86: Table 4-13. Indicator Led/Miscellaneous Connector Pin Assignments On The

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Indicator LED/Miscellaneous Connector on the CPTM04 Transition Module Table 4-13. Indicator LED/Miscellaneous Connector Pin Assignments on the CPTM04 Transition Module (J2) Signal Signal Signal Signal Description Number Mnemonic Description Number Mnemonic...

  • Page 87: Table 4-14. Ipmi System Management Bus Connector Pin Assignments On The

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Connector Pin Assignments IPMI System Management Bus Connector on the CPTM04 Transition Module (J1) Table 4-14. IPMI System Management Bus Connector Pin Assignments on the CPTM04 Transition Module (J1) Signal Signal Description...

  • Page 88: Table 4-16. Cpv5370 Backplane Connector Pin Assignments (J1)

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com CPV5370 Single Board Computer, CompactPCI Bus Connectors (J1 and J2) The CPV5370 Single Board Computer provides a 64 bit CompactPCI interface on connectors J1 and J2. Refer to Table 4-16 for J1 and...

  • Page 89: Table 4-17. Cpv5370 Backplane Connector Pin Assignments (J2)

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Connector Pin Assignments Table 4-17. CPV5370 Backplane Connector Pin Assignments (J2) Number GND RSV GND RSV CLK6 GND RSV CLK5 GND RSV GND BRSVP2E18 GND BRSVP2C18 BRSVP2B18 BRSVP2A18 GND GNT6# REQ6#...

  • Page 90: Table 4-18. Cpv5370 Single Board Computer, Rear I/O Connector Pin

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com CPV5370 Single Board Computer, CompactPCI Rear I/O Connectors (J3, J4, and J5) Table 4-18. CPV5370 Single Board Computer, Rear I/O Connector Pin Assignments (J3) Number VDDCCLK VDDCDAT V_BLU V_GRN V_RED V_VSYN...

  • Page 91: Table 4-19. Signal Descriptions For The Cpv5370 Single Board Computer

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Connector Pin Assignments Table 4-19. Signal Descriptions for the CPV5370 Single Board Computer Backplane Connector (J3) Signal Signal Signal Description Mnemonic Ethernet RD+, RD- Differential receive lines TD+, TD- Differential transmit lines...

  • Page 92: Table 4-20. Cpv5370 Rear I/O Pin Assignments (J4)

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Connector J4 contains floppy, printer port and miscellaneous functions. J4 is an optionally installed connector. Refer to Table 4-20 Table 4-21. Table 4-20. CPV5370 Rear I/O Pin Assignments (J4) Number AD[32]...
  • Page 93 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Connector Pin Assignments Table 4-21. CPV5370 Rear I/O Pin Assignments (J5) Number GND SPKR- ALARM- PBRESET- GND MCLK MDAT KBDCLK KBDDAT GND SMBLART SMBCLK SMBDATA GND UDATA0- UDATA0+ STB- GND VCC...
  • Page 94 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Table 4-22. Signal Descriptions for the CPV5370 Single Board Computer Backplane Connector (J5) Signal Signal Signal Description Mnemonic General 5V power supply Digital signal ground plane Keyboard/Mouse MCLK Clock for PS/2 mouse...

  • Page 95: Table 4-22. Signal Descriptions For The Cpv5370 Single Board Computer Backplane Connector (J5)

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Connector Pin Assignments Table 4-22. Signal Descriptions for the CPV5370 Single Board Computer Backplane Connector (J5) (Continued) Signal Signal Signal Description Mnemonic Parallel LPT Port, ACK- Pulsed by peripheral to acknowledge data sent...
  • Page 96 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Table 4-22. Signal Descriptions for the CPV5370 Single Board Computer Backplane Connector (J5) (Continued) Signal Signal Signal Description Mnemonic Floppy Disk Drive, DSKCHG- Indicates the drive door is open TTL levels...

  • Page 97: Table 4-23. Cptm04 Transition Module, Rear I/O Connector Pin

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Connector Pin Assignments CPTM04 Transition Module, Rear I/O Connectors (J3 and J5) Table 4-23 through Table 4-25 show J3 and J5 connector pinouts and signal descriptions. Table 4-23. CPTM04 Transition Module, Rear I/O Connector Pin...
  • Page 98 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Table 4-24. Signal Descriptions for the CPTM04 Transition Module, Backplane Connector (J3) Signal Signal Signal Description Mnemonic Ethernet (1 and 2) LANn_RD+, Differential receive lines LANn_RD- LANn_TD+, Differential transmit lines LANn_TD-...
  • Page 99 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Connector Pin Assignments Table 4-25. CPTM04 Transition Module, Rear I/O Connector Pin Assignments (J5) Number SPKR PBRESET MCLK MDAT KBDCLK KBDDAT SMBALRT SMBCLK SMBDAT USB0- USB0+ STB- USB1- USB1+ AFD- ERR-...

  • Page 100: Specifications

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Specifications Refer to these tables for: input power requirements (Table A-1) physical characteristics (Table A-2) lithium battery specifications (Table A-3) environmental specifications (Table A-4) Table A-1. Power Requirements for the CPV5370 Single Board...
  • Page 101 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Specifications Table A-3. Lithium Battery Specifications Rating Shelf Life 180mA/hour 2 years Table A-4. Environmental Specifications Parameter Condition Specification Temperature Operating 0°C to 50°C (32°F to 122°F) Non-operating -40°C to 85°C (°-40F to 185°F)
  • Page 102 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com BThermal Analysis Ambient temperature, air flow, board electrical operation, and software operation affect board component temperatures. To evaluate the thermal performance of a circuit board assembly, you should test the board under actual operating conditions.
  • Page 103 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Thermal Analysis You can find components on the board by their reference designators. Refer Figure B-1 Figure B-2. Versions of the board that are not fully populated may not contain some of these components.

  • Page 104: Figure B-1. Location Of Thermally Significant Components On The Cpv5370 Single Board Computer - Primary Side

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com 2943 0501 Figure B-1. Location of Thermally Significant Components on the CPV5370 Single Board Computer - Primary Side http://www.motorola.com/computer/literature Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com...

  • Page 105: Figure B-2. Location Of Thermally Significant Components On The Cpv5370 Single Board Computer - Secondary Side

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Thermal Analysis 2944 0501 Figure B-2. Location of Thermally Significant Components on the CPV5370 Single Board Computer - Secondary Side Computer Group Literature Center Web Site Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com...
  • Page 106 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Component Temperature Measurement This section outlines general temperature measurement methods. For the specific types of measurements required for thermal evaluation of this board, see Table B-1. Preparation We recommend 40-gage thermocouples for all thermal measurements.

  • Page 107: Figure B-3. Mounting A Thermocouple Under A Heatsink

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Thermal Analysis Note Machining a heatsink base reduces the contact area between the heatsink and the electrical component. You can partially compensate for this effect by filling the machined areas with thermal grease.

  • Page 108: Figure B-4. Measuring Local Air Temperature

    Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Measuring Local Air Temperature Measure local component ambient temperature by placing the thermocouple downstream of the component. This method is conservative since it includes heating of the air by the component.
  • Page 109 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Thermal Analysis Computer Group Literature Center Web Site Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com...
  • Page 110 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com CRelated Documentation Motorola Computer Group Documents You can get more information about CompactPCI by looking at the publications in Table C-1. You can get paper or electronic copies of Motorola Computer Group publications by: Visiting Motorola Computer Group’s World Wide Web literature...
  • Page 111 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Related Documentation Motorola Computer Group OEM Services, http://www.motorola.com/computer/support PCI Industrial Computer Manufacturer’s Group (PICMG) Hot Swap Specification, http://www.picmg.org Standard Microsystems Corporation, Ultra I/O Data Sheet, http://www.smsc.com/main/catalog/fdc37c67x.html Wired for Management, PXE (Preboot Execution Environment), http://developer.intel.com/ial/wfm...
  • Page 112 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Index flash bank 3-25 Flash BIOS write protect control register About This Manual 3-24 Advanced System Monitoring FPGA descriptions airflow FPGA registers alarm enable register 3-18 functional description alternate flash bank...
  • Page 113 Solution Systems Technologies Inc. 720-565-5995 | info@solusys.com | www.solusys.com Index NMI enable 3-16 power-on status 3-21 network boot status NMI enable register 3-16 watchdog timer 3-10 related documentation overview of contents xiii remote setup SCI enable register 3-15 peripheral component interconnect...
  • Page 114 720-565-5995 sales@solusys.com solusys.com  We are a systems integrator and value added reseller of computer hardware System Integration and software primarily focusing on the embedded marketplace. We provide custom turnkey solutions to get your project started quickly. We pride  Consulting ourselves in our agility and ability to engineer complex solutions quickly.

This manual is also suitable for:

Compactpci cpv5370-700-03Compactpci cpv5370-700-02Compactpci cpv5370-700-06Compactpci cpv5370-700-05Cptm04Cpmezz-256b ... Show all

Table of Contents