Mazda 1978 GLC Instructions; Maintenance And Servicing page 24

COMBINATION CONTROL LEVER
1. Turn and Lane.change Signals
For signaling turns, move the lever up or down in
conventional manner .
2. Headlight Beam Control
With the headlights on, the high and low beams are
selected alternately, each time the lever is pulled toward
the driver.
3. Pa.,ing High . Beam Control
For daytime passing, move the lever toward the driver.
The headlights will remain on until the lever is released.
3-8
4. Windshield Wiper Control
To turn the wipers on, twist the knob as shown.
Caution:
Do not operate the wipers against dry gra ss.
5. Windshield Washer Control
Caution:
1. Do not use radiator anti-freeze in windshield washer.
2. In cold weather, warm the windshield with defroster
before using the washer to help prevent icing that
may block vision.