Daikin BRYQ-A Service Manual page 31

ESIE15-11A | Part 3. Field settings
5. Highlight SECOND CODE NO. of the
FIRST CODE NO. to be changed, and
select desired "SECOND CODE NO."
by using  (Up/Down) button.
Multiple identical mode number settings
are available.
(In the case of group setting, all of
SECOND CODE NO. which may be set
are displayed as " * ". " * " is changed to
SECOND CODE NO. to be set. And,
SECOND CODE NO. " - " means no
function.)
6. Press Menu/Enter button. Setting
confirmation screen is displayed.
7. Select Yes and press Menu/Enter
button. Setting details are saved and
Field settings screen returns.
8. In the case of multiple setting changes,
repeat step "3" to "7".
9. After all setting changes are completed,
press Cancel button twice.
10. Backlight goes out, and "Checking the
connection Please stand by" is
displayed during initialization. After the
initialization, the basic screen returns.
C
AUTION
• When an optional accessory is installed on the indoor unit, settings of the indoor unit may be changed. See the
manual of the optional accessory.
• For field setting details of the outdoor unit, see installation manual attached to the outdoor unit.
23/09/16
VRV4 indoor units
In the case of individual
setting per indoor unit
3.
Field Settings
4.
Unit No. Mode
5.
0 20
Return Setting
Press the Menu/Enter button.
<Setting confirmation screen>
6.
Field Settings
7.
Save the settings?
4. Wired remote controller BRC1E51
<Field settings screen>
In the case of group setting
3.
Field Settings
5.
Return
FIRST CODE (SW) NO.
Yes No
Return Setting
Press the Menu/Enter button.
Setting confirmation
Mode
10
Setting
SECOND CODE NO.
Page 31