Install Wireless Locksets - Stanley QEL 200 User Manual

Document Lockset Identification
Record the MAC address before installing device – you will need this when configuring the
lockset.
Prepare Doors
Use the template provided with the lockset package to prepare the installation. You can also
find the template at www.stanley.com/templates.

Install Wireless Locksets

Use the installation instructions provided with the lockset hardware. You can also find
installation instructions at www.stanley.com/installationinstructions.
Test Functionality
Verify lockset operation by following these steps:
Insert the key
that is labled O.
Insert the key that
is labled O.
Insert the key that
is labled O.
Or use a Temporary Operator Card to test functionality
Place Temp Card near reader to
grant access to factory default
locksets.
Place Temp Card near reader to grant
access to factory default locksets.
Place Temp Card near reader to grant
access to factory default locksets.
Wireless System
Operator Key
Operator Key
Operator Key
Lock
Lock
Lock
Unlock
Unlock
Unlock
80