Develop A Site Plan - Stanley QEL 200 User Manual

Wireless & stand-alone
Hide thumbs Also See for QEL 200:
Table of Contents

Advertisement

Develop a Site Plan

Steps
1
Gateway(s) placement
2
Document gateway and lockset identification
3
Position gateways
Gateway(s) Placement
Prior to any installation, a technician must perform a Stanley Site Survey using the Site
Survey Kit. You can find the Site Survey Kit Quick Start Guide at www.stanley.com/
installationinstructions.
The technician may need you to make a site plan with building dimensions, distances
between buildings, possible obstruction, parking, and other gated access points prior to the
site survey. If one is not available through your facilities maintenance or project engineer,
visit the site to take measurements to create one.
Dentist Office
Host
Surgery Room
Patient Room
Gateway Specifications
The Gateway is a wireless device connected to the Host computer through a secure IP
address, similar to the way your computer is connected to the internet. It transfers data
signals from Wireless Locksets to and from the Host computer. The Gateway recognizes
all Wireless Locksets within its antenna range. One Gateway can control up to 64 Wireless
Locksets.
Wireless System
Closet
Patient Room
Gateway
250 ft
150 ft
Receptionist
Typical Site
Configuration
Typical Site
Con guration
Typical Site
Con guration
70

Advertisement

Table of Contents
loading

Table of Contents