Install Software
Steps
1
Install Software
1
Insert Stanley Intelli-M disc.
2
Double-click the setup.exe application icon.
3
Click "Run" to launch the installer.
4
Follow the screen prompts to create the Stanley Intelli-M database.
5
When prompted, click "Yes."
6
Following the system reboot, click "Run" to continue the installation.
Note
When prompted, create a strong database password. Enter a combination of upper
case, lower case, and numbers.
7
Select "Complete" for the Setup Type.
8
Click the "Install" button.
9
Click "Finish" to close the Intelli-M Access installer.
Install Wireless Locksets
Steps
1
Check Installation Settings
2
Document Lockset Identification
3
Prepare Doors
4
Install Wireless Locksets
5
Test Functionality
Check Installation Settings
Wireless Locksets are for use inside protected areas. For other applications (such as outdoor
use), contact the factory for the appropriate NEMA enclosure. Changes or modifications not
expressly approved by Stanley Security Solutions could void the user's authority to operate
the equipment. Make sure to check temperature. Stanley locks will work from -31°F to 151°F.
Note
Locks work within a temperature range of -31°F to 151°F. Extreme heat reduces
wireless signal strength and may cause a loss of connectivity.
Wireless System
79