Standalone Management - Stanley QEL 200 User Manual

Document Lockset Identification
Record the MAC address and location of where you intend to install before lockset
installation to keep for your personal records.
Image of where the MAC address is located on the lockset
Prepare Doors
Use the template provided with the lockset package to prepare the installation. You can also
find the template at www.stanley.com/templates.
Install Locksets
Use the installation instructions provided with the lockset package. You can also find
installation instructions at www.stanley.com/installationinstructions.

Standalone Management

Steps
1
Key Lock/Unlock
2
Card Lock/Unlock
3
Basic Functionality
4
Add/Remove User(s)
5
Battery Functionality
Key Lock/Unlock
Verify lockset operation by following these steps:
Insert the key
that is labled O.
Insert the key that
is labled O.
Insert the key that
is labled O.
Standalone System
19
Operator Key
Operator Key
Operator Key
Lock
Lock
Lock
Unlock
Unlock
Unlock