Fm Mode; Auto Scan; Manual Tune - MAXTEK 77429 User Manual

FM

FM Mode

The radio, when turned on, is usually in DAB mode. To enter the FM
mode, press the 'Mode' button. FM will show on the display.

Auto Scan

Press the tune +/- button for 2 seconds to start the FM auto scan in
either direction along the frequency range.
The scan will stop at the next strongest signal it picks up. If the scan
continues without stopping you will need to manually tune the radio.
You can save the channel as a preset following directions on page
14, Preset Store.
Please Note:
The best auto scan results occure if the scan setting is set to 'all stations'
See page 15.

Manual Tune

Press the tune +/- button repeatedly to cycle through the FM
frequency range. The FM frequency tuning progresses in 0.05MHz
increments.
You can save the channel as a preset following directions on page
14, Preset Store.
After Sales Support
UK/N.IRELAND HELPLINE N : 01270 508538
O
REP.IRELAND HELPLINE N : 1800 995 036
O
WEBSITE: www.quesh.co.uk
13
EMAIL: enquiries@quesh.co.uk