Fm Mode; Select Fm Mode; Auto Tune Fm; Manually Tune Fm - MAXTEK DB-318 User Manual

FM Mode

Select FM Mode

Press 'Mode' to change from DAB to the FM function.

Auto Tune FM

To auto tune to the next available radio station press and hold either
'Tune +/-' buttons for 3 seconds. This will start the FM auto scan.
'+' will scan up the channel and '-' will scan down the channel.
The scan will always stop at the next signal received.
Save as a preset if required (see page 15).

Manually Tune FM

Press either 'Tune +/-' buttons to manually tune the radio in FM
mode. This helps in poor signal areas to get a clear signal.
Save as a preset if required (see page 14).

FM Options

FM Menu Options

Press and hold the 'Info/Menu' button until you see 'Scan Setting'.
Turn the dial to cycle the options and press the dial to select.
The options here are:
Scan Setting > Audio Set > System (See page 11).
8
After Sales Support
UK/N.IRELAND HELPLINE N
REP.IRELAND HELPLINE N
O
WEBSITE:
EMAIL: enquiries@quesh.co.uk
: 01270 508538
O
: 1800 995 036
www.quesh.co.uk