MAXTEK 77429 User Manual page 20

System
Turning The Alarm On/Off
The alarm can be set or disabled with the last option when
setting the alarm (See page 17, Setting The Alarm).
To check which alarm(s) have been set press the
radio into standby mode and check the display.
The bell icon and number indicate alarm 1 or 2 is active and the
double bell icon indicates that both alarms are active.
You can enable or disable the alarms when the radio is in standby
mode. This can be done by pressing the 'Alarm' button repeatedly.
Once you have the option required press the dial to save the
selection.
Alarm Snooze
When the alarm is sounding press the dial to activate a 5 minute
count down. The count down will be shown on the screen. Once the
counter reached zero the alarm will sound again.
Please Note:
Only a 5 minute snooze period is available.
18
button to put the
After Sales Support
UK/N.IRELAND HELPLINE N
REP.IRELAND HELPLINE N
O
WEBSITE:
EMAIL: enquiries@quesh.co.uk
: 01270 508538
O
: 1800 995 036
www.quesh.co.uk