MAXTEK 77429 User Manual page 24

System
Backlight - Timeout
This option will allow you to set the length of time in seconds before
the screen dims. Once in the Backlight sub menu list, press the
tune +/- button repeatedly until you get to 'Timeout' and then press
the dial to select this feature.
Select the update source by using the tune +/- button to cycle
through the available options and press the dial to confirm.
Your timeout options are:
(seconds) 10 > 20 > 30 > 45 > 60 > 90 > 120 > 180 > On
The asterisk in the top right indicates the current setting.
Press 'Menu' a few times to exit this menu option to the radio.
Backlight - On Level
On level is the brightness of the display when the radio is being
interacted with i.e. button presses. Once in the Backlight sub menu
list, press the tune +/- button repeatedly until you get to 'Timeout'
and then press the dial to select this feature.
In this sub menu you can choose from the following:
The asterisk in the top right indicates the current setting.
Press 'Menu' a few times to exit this menu option to the radio.
22
High > Med > Low
After Sales Support
UK/N.IRELAND HELPLINE N
REP.IRELAND HELPLINE N
O
WEBSITE:
EMAIL: enquiries@quesh.co.uk
: 01270 508538
O
: 1800 995 036
www.quesh.co.uk