Blue Tube Connection; Red Tube Connection - Watts Premier RO-PURE Plus Installation, Operation And Maintenance Manual

Mounting Holes
VOC CARBON
Blue Tube Connection (From FAUCET To The RO Module)
Locate the 1/4" BLUE tube from the RO faucet. Insert the open end of the tube with the 90*
Step 13
bend into the open 1/4" quick connect fitting on the back side of the RO-Pure Head behind
the Post Filter head making sure the tube is pushed in all the way to the tube stop. See
Diagram Above
Red Tube Connection (From FAUCET To The RO Module)
Locate the 1/4" RED tube attached to the RO faucet. Insert the end of the
Step 14
red tube with the 90* bend into the open 1/4" quick connect fitting on the
back side of the RO-Pure Head behind the Membrane head making sure
the tube is pushed in all the way to the tube stop. See Diagram Above
* IMPORTANT:
The Flow Restrictor is installed inside of the red tube at the bent end. DO
NOT REMOVE THE FLOW RESTRICTOR OR CUT THE RED TUBING AS IT
WILL DAMAGE THE FLOW RESTRICTOR.
Rear View of RO-Pure System
BLUE TUBE - TANK
RED TUBE - BRINE
BLUE TUBE - FAUCET
MEMBRANE PRE CARBON
Page 10
SEDIMENT
Flow Restrictor
Red Tubing to Manifold
(Attached to faucet)
GREEN TUBE
Flow
Restrictor
Insert