Datavideo ITC-100 Instruction Manual page 10

Channel Buttons 1~8
Opens communication with individual channels.
More than 1 channel can be active at any given
time, active channels are illuminated red.
All active channels will hear communication from
the operator or from any other active channels.
The buttons will also indicate if any channel is
paging, the paging channel will flash in orange
until the page is answered.
Mute Button
Mutes all communication from the base station or
any other channels.
NOTE: If any channel uses the CALL button, the
paging tone will still sound even when the MUTE
button is active.
Volume Control
Controls the volume of the built-in speaker or
audio output to the headphone or MIC headset
(whichever is connected).
Built-In Speaker
Sounds audible alert when a channel is paging and
provides audio during talkback conversations.
Note: Speaker is disabled when headphone or
MIC headset is connected to the ITC-100.
12V Light Socket
12V light socket for powering the connected
gooseneck light (supplied).
10