Table of Contents
Advertisement
2 Getting Started
Section overview
This section provides help on unpacking the RM500SL and connecting various components
and accessories. Note that battery pills (SL-110), the RECD transducer (SL-100), the
barcode scanner (VA-120) and a microphone extension cable (VA-130) are accessories for
the RM500SL and must be ordered separately.
Unpacking and connecting
1. Carefully unpack the RM500SL and check the contents of the shipping box against the
enclosed packing list. Note that some parts may be packed inside the test chamber.
2. Unwrap the power cord from its stowage hooks - noting carefully how it has been
packed. To avoid serious damage to the display screen, always repack the cord this way.
3. Connect the power cord to the socket next to the power switch on the right side of the
unit. Plug the other end into a grounded 100 – 240 volt power outlet.
CDROM
Operating software, RM500SL Program memory updater program, some test signals, the
online Help files and a printable user's guide are all on the Audioscan Software CD-ROM
supplied with the instrument. See replacement and Software updating for more
information.
Microphone connection
1. Plug the reference microphone and the coupler microphone into the connectors in the
test chamber as shown.
User's Guide Version 3.4 © June 2011
RM500SL
®
11
Advertisement
Table of Contents
